Bardac Drives
370 | 3.7A, 1-ph, 120V/230V, Non-Regen, Non-Reversing, Non-Isolated DC Drive
- SKU:
- 370
- Availability:
- Typically in stock (Maryland)
- Power at 90VDC:
- 0.25HP
- Input (Supply):
- 120V, 1-ph in
- Power at 180VDC:
- 0.5HP
- Input (Supply):
- 230V, 1-ph in
- Amps:
- 3.7A
- Enclosure Type:
- IP20 (open)
- Weight:
- -
- Dimensions (H x W x D):
- 4" x 4" x 1.6"
- More Information:
- Data Sheet
Description
Single Phase DC Systems Drives
Non-isolated, non-reversing, non-regenerative single phase DC drive.
Must not be connected to other controllers without signal isolation being added, consider using isolated drive for systems applications.
370 Key Features:
- For DC motors rated up to 3.7 Amps
- Integral AC supply fuse
- Selectable dual international voltage supply 110/240V AC 50/60HZ
- Adjustable current overload protection
- Tachogenerator or armature voltage speed feedback
- Adjustable acceleration rate between 1 and 20 seconds
- Remote stop/start signal input facility
- Adjustable IR compensation for improved AVF speed regulation
- Sophisticated dual loop control
- Infinitely variable
- Speed adjustment via remote potentiometer
- Electronic soft start
- Drive run input
- Suitable for permanent magnet, shunt wound or universal motors
- Compact footprint
Related Products
Related Products
400i | 4A, 120V/230V, Non-Regen, Non-Reversing, Fully Isolated DC Drive
Bardac Drives
Single Phase DC Systems Drives
This family of single phase DC drives, with isolated control circuitry, is designed to meet the most exacting requirements of high performance systems builders.
This...
K340 | 3.4A, 1-ph, 120V/230V, Non-Regen, Non-Reversing, Non-Isolated DC Drive
Bardac Drives
K-Series Drives Ultra compact DC motor control. Non-isolated. Make upgrading your existing control panel easier. Save space in new DC single direction motor control systems. The ultra compact DIN...
K340i | 3.4A, 1-ph, 120V/230V, Non-Regen, Non-Reversing, Fully Isolated DC Drive
Bardac Drives
K-Series Drives Fully isolated DC motor control with compact design. Improving or upgrading your single direction DC motor control system is easier with this series of fully-isolated controllers. The...
K340XRi | 3.4A, 1-ph, 120V/230V, Regen, Reversing, Fully Isolated DC Drive
Bardac Drives
K-Series Drives Regenerative DC motor control with compact design. Fully isolated control electronics. This 4-Quadrant regenerative DC motor controller gives a fast controlled response over the full...