Bardac Drives
E3-220105-104B-01 | Outdoor 4X Rated, 1.5HP, 230V, 1-ph in, 230V, 1-ph out
- SKU:
- E3-220105-104B-01
- Availability:
- Typically in stock (Maryland)
- Power:
- 1.5HP
- Input (Supply):
- 230V, 1-ph in
- Output Rating:
- 230V, 1-ph, 10.5A
- Amps:
- 10.5A
- Enclosure Type:
- NEMA 4X
- Frame Size:
- 2
- Weight:
- 9.3 lb
- Dimensions (H x W x D):
- 10.1" x 7.4" x 7.4"
- More Information:
- Data Sheet
Description
Important Application Note!
The single phase output E3 drive is only suitable for use with variable torque, direct coupled type loads; such as pumps and fans. Bardac cannot guarantee successful operation with belted loads.The single phase E3 is only suitable for use with either permanent split capacitor or shaded pole motors.
Please check the motors suitability for operation with an AC Drive.
Simple Commissioning
14 parameter basic setup. Default settings suitable for most applications. Contactor style connection for simple wiring.
Up to 50 parameters available in total for a highly flexible performance.
Intuitive Keypad Control
Precise digital control at the touch of a button.
Integral Brake Transistor
Saves space, cost, and time for installation. Frame 2 and up.
Application Macros
Switch between Industrial, Pump & Fan modes to optimize E3 Series drives for your application.
Optional Internal Category C1 EMC Filter
An optional internal filter is available for every E3 Series drive. Please consult factory for details and lead time.
Cat C1 according to EN61800-3:2004
Sensorless Vector Control for all Motor Types
- Induction Motors (IM)
- Permanent Magnet Motors (PM)
- Brushless DC Motors (BLDC)
- Synchronous Reluctance Motors (SynRM)
- Line Start PM Motor (LSPM)
Options:
- T2-OPORT-IN Remote keypad and display
- T3-OPPAD-IN Enhanced remote keypad and display
- T3 Stick plug in unit for fast up/down load of parameters
- smarty remote I/O, programmable control, USB and Ethernet connectivity
- speedy programmable control, USB and Ethernet connectivity
- savvyPanel smart touchscreen operator station
- EMC Filter Option available (contact factory for details)
NEMA 4X - Up to 30HP
- Outdoor rated tough polycarbonate enclosure. (Sunshield required for outdoor rating. Not included.)
- Sizes 1-4 up to 30HP/22kW
- Dust tight and washdown ready
Direct MountingInstall directly on your processing equipment and be sure of protection from dust, contaminants and high‑pressure washdown. Locally CustomisableFlat front to terminal cover with mounting points for switches and an internal PCB. Coated Heatsink as StandardIdeal for hygiene based operations requiring washdown — such as food and beverage Switched ModelsSimply wire up the drive, turn the inbuilt potentiometer and the motor will start running – allowing immediate energy savings. |