drive.web
smarty3 | Automation Controller, Ethernet and USB, Distributed Control, 32 I/O Points, 4x Frequency I/O, 1x Encoder Input, Optional Expandable I/O
- SKU:
- dw240-DM-C3
- Availability:
- Typically in stock (Maryland)
- Dimensions (H X W X D):
- 3.5” x 5.5” x 3.1” (87 x 140 x 77mm)
Description
Advanced Universal Automation Controller – 61 Terminals – with encoder and steppers
Generic Stock Build Includes:
100baseTX Ethernet, auto-negotiating, USB microB
XIO Port for extended I/O options
Battery backup for realtime clock
Port Options for CAN & ModbusRTU
Power: 24VDC
dw build options -04, -05, -06, -10, -25, -26, -29, -39
Master Modbus RTU (unisolated), Screw or Clamp Terminals, DIN Rail Mounting
- 8 AI . . . analog in, -11V to +11VDC, 100KΩ, up to 1kHz (can be used as digital inputs)
- 8 AO . . . analog out, ±10.5VDC, 10mA, up to 1kHz (can be used as DO or reference voltages)
- 8 DI . . . digital in, 100KΩ, 8V threshold, ±3V hysteresis, 50V max, up to 1 KHz (can also be used as event inputs)
- 8 DO . . . digital out, 24V source, up to 350mA (shared), internally current limited
- 4 FT . . . Frequency/Timing
- Frequency/Event input: 5V max, up to 100kHz
- Frequency/Stepper output: 5V sinking, up to 350mA (shared)
- F inputs can be used as event inputs or digital inputs
- F outputs can be used to generate frequency, control stepper amplifiers, or as digital outputs
- 1 AB . . . Encoder, differential inputs (5.5V max), up to 1MHz
The smarty dw240 series comes fully loaded:
- Install a dw240 on the customer interface terminal rail to save on wiring andinstallation costs!
- Floating point math for accurate and complex calculations
- Count and Frequency with 64-bit count forprecision positioning; to 1MHz input, 500kHz output
- High speed event inputs for positionmarkers and registration
- Processing and networking speeds that areup to 10 times faster than the dw210, especially with larger configurations
- Increased storage; four times more capacity
- Up to six frequency inputs with multiple modes
- Up to two current inputs; 0 to 20mA, 4-20mA
- Up to two encoder inputs
- Up to seven timing outputs with multiple modes to 500kHz; frequency, stepper, and digital
- Real-time clock with optional battery back up. Low-power mode allows real time clockto run without power from coin cell battery, USB power, or 24-hour internal storage. (Battery not included)
- Sensor bus for large, smarty-dedicated networks to be announced
- XIO, Extended I/O port for up to 10 fast-updating modules with up to 16 I/O on each.Modules for high current, high voltage, precision analog, load cells and more are planned
The smarty dw240 series controller consists of a “cassette” that connects directly to system field wiring via four alternative, passive “terminal carriers”. This means big installation savings!
100% compatiblewith all existing speedys, smartys, and savvyPanels!