smarty4 | Automation Controller, Ethernet and USB, Distributed Control, 32 I/O Points, 6x Frequency I/O, 2x Encoder Inputs, Optional Expandable I/O

Advanced Universal Automation Controller – 103 Terminals – with encoders, steppers, and more!

Generic Stock Build Includes:
100baseTX Ethernet, auto-negotiating, USB microB
XIO Port for extended I/O options
Battery backup for realtime clock
Port Options for CAN & ModbusRTU
Power: 24VDC
dw build options -04, -05, -06, -10, -25, -26, -29, -39
Master Modbus RTU (unisolated), Screw or Clamp Terminals, DIN Rail Mounting

• 8 AI . . . analog in, -11V to +11VDC, 100KΩ, up to 1kHz (can be used as digital inputs)
• 8 AO . . . analog out, ±10.5VDC, 10mA, up to 1kHz (can be used as DO or reference voltages)
• 8 DI . . . digital in, 100KΩ, 8V threshold, ±3V hysteresis, 50V max, up to 1kHz (can also be used as event inputs)
• 8 DO . . . digital out, 24V source, up to 350mA (shared), internally current limited
• 2 CI . . . Current Input, 4-20mA, 0-20mA, 20-4mA, 20-0mA, 100Ω
• 6 FT . . . Frequency in: up to 100KHz, 30V max, 100KΩ with pull-up or pull-down (can be event or digital inputs)
• 7 TO . . . Timing Output, up to 500kHz, 30V max, sinking, pull-up, up to 350mA (shared) (for frequencies, steppers or DO)
• 2 ABZ . . . Encoders, EIA-422/485 differential (5V max), up to 1MHz
• 2 AB . . . Reconnect terminals for encoders

The smarty dw240 series comes fully loaded:

• Install a dw240 on the customer interface terminal rail to save on wiring andinstallation costs!
• Floating point math for accurate and complex calculations
• Count and Frequency with 64-bit count forprecision positioning; to 1MHz input, 500kHz output
• High speed event inputs for positionmarkers and registration
• Processing and networking speeds that areup to 10 times faster than the dw210, especially with larger configurations
• Increased storage; four times more capacity
• Up to six frequency inputs with multiple modes
• Up to two current inputs; 0 to 20mA, 4-20mA
• Up to two encoder inputs
• Up to seven timing outputs with multiple modes to 500kHz; frequency, stepper, and digital
• Real-time clock with optional battery back up. Low-power mode allows real time clockto run without power from coin cell battery, USB power, or 24-hour internal storage. (Battery not included)
• Sensor bus for large, smarty-dedicated networks to be announced
• XIO, Extended I/O port for up to 10 fast-updating modules with up to 16 I/O on each.Modules for high current, high voltage, precision analog, load cells and more are planned

The smarty dw240 series controller consists of a “cassette” that connects directly to system field wiring via four alternative, passive “terminal carriers”. This means big installation savings!

100% compatiblewith all existing speedys, smartys, and savvyPanels!